Wireless Connectivity

The UTRED30-WiFi is designed to upload real time data to the LogTag^® Online cloud application. To do this, the logger must be connected to a wireless network (WLAN) and be able to connect to LogTag's cloud service on the internet.

Before real-time data can be uploaded, a number of setup steps need to be completed.

• You need to have access to a LogTag^® Online account.

  You can create an account by navigating to http://logtagonline.com and clicking Create and Account. You can also use the LogTag^® Online Connection Wizard to navigate to this page.

• The logger needs to be configured for connecting to your network and to LogTag^® Online.

  This is done with the LogTag® Online Connection Wizard during the logger's configuration.

• The logger needs to be registered against your team's account.

  The LogTag^® Online Connection Wizard will automatically register the UTRED30-WiFi for you if you provide your sign in details when you run the Wizard. You can also register the device by signing in to your LogTag^® Online account at http://logtagonline.com and completing the steps for device registration.

• The logger needs to be associated ("attached") to a location.

  The logger's uploaded real-time readings will only appear in LogTag^® Online, if you have allocated a place where the data can be stored. In LogTag^® Online this is called a location, and associating the logger wih this location is called attaching the logger.

  Unlike other loggers uploaded via one of the wireless interfaces a UTRED30-WiFi does not generate files on LogTag^® Drive.

  You can find more information about locations, device registration and attaching loggers in the LogTag^® Online help.

Before you start the LogTag^® Online Connection Wizard please make sure you have following information:

• Your wireless network name (the network SSID)
• Your wireless network password (WiFi password)
• Your LogTag^® Online account name (email address)
• Your LogTag^® Online sign in password
• If you are part of more than one team, the name of the team for which you want to register the logger.