LTI-WIFI Wireless Desktop Interface

The LogTag^® wireless desktop interface LTI-WIFI does not require configuration using LogTag^® Analyzer, however, the LogTag^® Online Connection Wizard can be started directly from LogTag^® Analyzer from the LogTag Online menu. If you are already signed in to your LogTag^® Online account with LogTag^® Analyzer, you will not need to provide your account details again. If you have selected a team, a new device will be registered against that team.

Continue with the easy setup as described until the connection to LogTag^® Online is tested.

The LTI-WIFI cannot report a successful connection to LogTag^® Online via the Wizard. Instead, you need to confirm the device was successfully configured by looking at the network LED at the front of the interface (after you have deployed the interface in its final location, you should also confirm the device can successfully connect).

If the blue network LED is permanently lit approx. 20 seconds after the configuration was uploaded, your LTI-WIFI has successfully connected to the LogTag^® Online cloud server, and your interface is ready to be deployed.

The interface cannot upload real time data, however, data uploaded from a logger can still be uploaded to a location. This can be set up in LogTag^® Online. For more information please see the online help for the interface at Getting started with the LTI-WIFI and the LogTag^® Online help.