Appendix 1 - Battery Replacement

Prepare the Logger

• Download the unit to save any recorded data.

• Hibernate the unit using LogTag^® Analyzer.

  Failing to hibernate the logger may result in serious memory corruption. As a result you may no longer be able to use this product.

Remove the old battery

• Carefully remove the rear label covering the battery door using a small-bladed screwdriver or knife:

  

• Use a coin to turn the battery door anti-clockwise; remove it from the case:

  

• Remove the battery using a small-bladed screwdriver, as shown:

  

Insert the new battery

Only use batteries from a reputable manufacturer! Check the operational temperature range of the battery and make sure it covers the range of the UTRED30-WiFi.

• Put a new CR2032 cell into the battery compartment as shown; the right hand edge of the battery is inserted first against the contact:

  

• Press firmly down on the left hand side of the battery to click the battery into place:

  

• Replace the battery door; turn clockwise to lock it into place.

  

• Cover the battery door with either a new label (Part # 100-000502) or reuse the old one.

  

• Re-configure the logger with LogTag^® Analyzer.

 

Please recycle or dispose of the old battery according to your local environmental regulations.