Paused Readings
During configuration of the UTRED30-WiFi you can set the option to ignore up to 15 readings for alarm- and statistics calculations after either button is pressed. The readings are still shown on the graph and in the data listing, but they are labelled as paused, and their value is ignored when determining alarm trigger conditions, minimum/maximum values and other statistical calculations.
It allows the logger to acclimatise to the environment again, before further readings are processed.
|
After a button press the display shows the word PAUSED next to the The option is set in the Advanced Settings tab during configuration with LogTag® Analyzer and is expressed in number of readings after the last button press. Paused readings are specially marked in the graph and data listings. . |
|
symbol. 
PAUSED will turn off as soon as the last ignored reading has been recorded. It will show longer, if your last button press was just after the logger took a temperature reading, but will be displayed for a shorter period if you pressed the button just before a reading is taken. For example, if you configure a logging interval of 10 minutes and 2 paused readings, the time for paused to show could be as short as 10 minutes, but as long as 20 minutes.