Advanced Settings

Select the Advanced Settings tab for additional configuration settings. These settings decide how some of the elements are displayed on the unit's own display and also set other options specific to the UTRED30-WiFi.

Parameters that influence the appearance of the display are

• Pause alarm/statistics processing (see Paused Readings)
• Temperature display unit (see Display Overview)
• Switch off display after 30 seconds (Power save, see Power Save)
• Allowing a user to reset the trip's minimum and maximum values on the display during recording

Parameters influencing specific behaviour of the UTRED30-WiFi are

• clear and reset alarm when the START/CLEAR/STOP button is pressed
• leaving the alarm turned on, even if readings return to the normal temperature range again
• allowing the user to stop the logger with the START/CLEAR/STOP button
• allowing the user to reset the logger with the START/CLEAR/STOP button
• Enabling the buzzer for the audible alarm

For detailed information about each parameter please read the section about Configuring a LogTag^® for logging in LogTag^® Analyzer’s User Guide or press F1 for help.