Power Save
When Power Save is enabled, the display will automatically switch off if none of the buttons have been pressed for 30 seconds.
This function is appropriate in applications where you don't need to look at the display frequently, such as in transit monitoring applications, as the logger uses less battery power when the display is not turned on.
Pressing any button will re-activate the display.
Power save is enabled or disabled when configuring the UTRED30-WiFi via LogTag® Analyzer in the Advanced Settings tab.
Note: The display will turn off, even if there is a pending alarm! The Red Alert LED will still blink.
In Low power operation, power save will be active regardless of the settings made in LogTag® Analyzer.