Clearing an Alarm
During configuration with LogTag® Analyzer you can allow a user to clear an alarm on the display. This is a useful function for an inspector, so new alarms can be recognised easier.
This display screen shows an existing alarm that occurred yesterday, but has not yet been cleared:
To clear this alarm (quickstart enabled), press and hold the button.
If the quickstart option is disabled, the 
symbol will flash for approx. 6 seconds. When the symbol remains permanently on, release the button within 2 seconds. The symbol now turns off, and the alarm is cleared.
The alarm will not be cleared if you …
- release the button before the symbol remains permanently on, or
- if you keep holding the button after the symbol remains permanently on for more than 2 seconds.
In this example the paused function was activated, and the paused symbol is shown on the display. For more information about paused readings please see the section about Paused Readings.
Note: Only the Alarm Indicator can be cleared! The day alarm marker (
in the above example) remains shown, as it is part of the statistic summary.